Leaves Factory In 1-2 Weeks
Be the first to review this product and earn a chance for a $10 store credit when you place a review on this product post purchase.
Cummins Onan Connect Series Accessory Battery Charger 15A | Part 0300-5878-01
Cummins Power Generation fully automatic battery chargers - using switched mode power electronics - are constant voltage/constant current chargers incorporating a 4-stage charging algorithm. Designed for use in applications where battery life and reliability are important; these chargers, complete with built-in equalize charge capability, are ideal for stationary or portable starting battery charging service. To achieve optimum battery life, a 4-stage charging cycle is implemented. The four charging stages are trickle, bulk, absorption and float. The trickle stage safely charges overly discharged batteries. It protects a damaged or shorted battery from excessive current. During bulk charge a constant current is applied to quickly restore the maximum battery charge level in the shortest amount of time.
Protection: All models include a 20 amp DC output breaker. Re-settable breakers are used for input voltages 240 VAC and lower. For over 240 VAC branch circuit rated fuses are used.
Easy Installation: Clearly marked terminal blocks and panel knockouts provide convenient connections of input and output leads.
User Display: Output voltage and current, fault information and configuration options are indicated on the alphanumeric display.
Monitoring: An LED indicates the condition of the charger. Green indicates normal charging operation, amber indicates equalizing and red indicates a fault condition.
Adjustable Float Voltage: Float voltage can be set through the alpha-numeric display for optimum battery performance and life.
Temperature Compensation: An optional external sensor is available for temperature compensated battery charging.
Faults: The charger senses and annunciates the following fault conditions: Input overvoltage, input undervoltage, AC power loss, batttery overvoltage, battery undervoltage, charger circuitry over temperature, battery over temperature, unrecoverable battery and overload/overcurrent. Includes 30 volt/2 amp isolated contact for common alarm.
Parallel Redundant Operation: Charges can be operated in parallel for redundant reliability or additional charging capacity.
Vibration Resistant Design: Complies with UL 991 vibration resistance requirements.
UL 1236 (BBHH) Listing: For use with lead acid batteries in generator set insatallations. Also suitable for use with NiCad, gel and AGM batteries.
9.75"L x 5.56"W x 6.14"D
Note: Mount inside for Connect Series gensets
Kit Includes: Battery Charger, Operators Manual and Instruction Sheet A003X677