Safely back up essential appliances without extension cords.  During a power outage, skip the hassle of running multiple extension cords from your generator to your appliances.  Instead, connect your Generac portable generator to a permanently installed Generac manual transfer switch.  A Generac manual transfer switch allows you to safely switch from utility to portable generator power in an emergency, and power critical circuits through your home's electrical system.

Benefits & Features:

• Safe:  Mechanically interlocked generator and utility breakers prevent dangerous backfeeding to avoid injuring utility line workers.
• Easy to Maintain and Expand:  Interchangeable type circuit breakers make it easy to reconfigure, replace, or expand the circuits in your switch.
• Powers Hard-Wired Circuits:  Directly powers hard-wired appliances such as your furnace, well pump, and septic pump.
• Fast, Flexible Installation:  Suitable for flush or surface mounting.
• Dual Wattmeters:  Help you monitor and balance the loads on your generaotr, prolonging generator life.

Kit Contents:

• Transfer Switch: 50 Amp, Nema 1 for indoor installation only.
• Cord: 10 Ft. (6/4) with 14-50 Male and CS6364 50 Amp Locking Female
• Power Inlet Box:  50 Amp, aluminum, must be hard wired.
• Install manual, wiring harness, conduit and fittings, wire connectors.

Compatible with Generac Portable Generators equipped with 50 Amp outlets such as:

Generac Portable GP Series GP15000E Electric Start

Generac Portable GP Series GP17500E Electric Start

Generac Portable XG Series XG10000E Electric Start